CT92466A/02
13 in stock
Switch Input Module (SIM)
Description
Condition: Overhauled & Tested
Location: UK
Manufacturer: Siemens
Control System: Rustronic MkII
Warranty: 12 Months
Equivalent part Numbers: CT92466A/02
Suitable for the engine range: SGT100, SGT200, SGT300, SGT400, LM1600, LM2500, LM5000, LM6000
The Switch Input Module provides an interface between the control system and sixteen two state plant switches.
- 16 channels arranged as four groups of four inputs.
- Separate plant power for each of the four groups.
- Card edge lamps for input status, plant power and board healthy indication.
- All input groups isolated and filtered.
- Inbuilt diagnostic and card watchdog facilities.
- All bus and plant connections via rear of card allowing easy installation.
- Easy connection to DIN rail mounted plant termination modules.
| Plant Inputs | 16 off arranged in four groups of four | |
| Input Range | Logic ‘0’ for input voltage < 1 V Logic ‘1’ for input voltage > 15 V (current = 8mA) |
|
| Maximum Input | 30 V with standard termination module (current = 18mA) (alternatives available using other termination modules) |
|
| Speed | 10mS using standard software | |
| Board Format | Extended double Eurocard (160 x 220mm) Lower connector for bus interface Upper connector for plant input and output |
|
| Board Pitch | 0.8 Inch centres | |
| Bus Interface | G64 | |
| Power Requirements | +5V | at 150mA |
| Temperature | Operating preferred Operating Maximum Storage |
10 to 30 °C 0 to 70 °C -20 to 85 °C |
| Humidity | 10 to 90 RH, non condensing | |
Interface Modules
The DIN rail mounted termination modules provide a simple means of interfacing the rack mounted boards to the plant wiring. They also allow the ‘standard’ interface of the board to be ‘tailored’ to the specific plant requirements. The interface to the board is via 4 off 14 way ribbon cables, one for each group of 4 channels. The interface to the plant is via screw terminals capable of accommodating 2.5 mm2 wire and also via a test plug in parallel with the screw terminals.
The available interface modules are:-
- Switch Input Interface Module (CT92582A/01)
- Double Switch Input Interface Module (CT94134/01)
Related products
-
Frequency Input Module (FIM) -
Power Supply Unit (PSU) -
Programmable Processor Module (PPM) PPM1… -
Analogue Input interface module
